Piercing Wire Connector

Short Description:

Piercing Wire Connectors are designed for low voltage ABC cable or overhead line.


Product Detail

Product Tags

Product specification sheet

Type

Main Line (mm²)

Tap Line (mm²)

CPL-1

16-95

16-25

CPL-2

35-120

35-120

Product Introduction

Piercing Wire Connectors are designed for low voltage ABC cable or overhead line.

The insulated shell is made of high-quality insulation and flame retardant material, the shell is hard and not easy to break, corrosion-resistant, aging-resistant, much more durable.

Equipped with shear head bolt. Nut in hot dip galvanized steel, the bolts with 8.8grade or more higher. Linemen keep the possibility to disasembly the insulation piercing clamps thanks to the second head of the nuts.The seal compound is 6KV/min underwater test qualified.

Tested for water tightness at the voltage of 6kV 50HZ for 1 minute under standard EN 50483-4, NFC 33-020. The blades of the insulation piercing connectors are made of tin-plated copper or tin-plated brass or aluminium alloy allowing connections to Al or Cu conductors. Good electrical conductivity and effective oxidation prevention.

The piercing wire connector (IPC) is widely used for Low Voltage Aerial Bundled Conductor (LV ABC) lines up to 1KV as well as connection in service line system, household distribution system, commercial structure distribution system, street light distribution system and underground connection system.


  • Previous:
  • Next:

  • Write your message here and send it to us